Revive Your Equipment with Services for Small Engine Repair

The engine is a vehicle’s main powerhouse. Through the process of burning fuel, it produces mechanical power. The engine comprises of various components like fuel, exhaust, ignition, cooling, combustion, and lubrication. Small engines are primarily used for powering vehicles or equipment which run on low-powered internal combustion. Lawn mowers, generators, concrete mixers, pumps, snow blowers and several other machines are run with the help of small engine which requires independent power sources.

Small engines structurally consist of a single-cylinder and a few V-twin units. They are ideal for low-displacement motor vehicles like motorcycles, ATV’s and go-karts. The individual systems in small engines work together to produce power. Each of these systems togetherform a constitution of components to ensure the smooth functioning of internally gasoline-powered machines.

Common Problems with Small Engines

If your land mower or small engine outdoor power equipment stops working, these could be the probable maintenance issues and areas which need small engine repair. These inputs come from experienced professional for small engine repair in Westborough.

• The Problemin the Fuel Line

Once you spot a problem with the machine, ensure thatthe fuel is fresh and the tank is full. Closing the shut-off valve is of utmost importance. Often the problem in the fuel line sparks off due to clogging and blocking in the inlet screen and fuel tank cap respectively.

• CarburettorIssues

In the small engine devices, the most common problem isblocking of the carburettor and flooding of the engine. Problems with the spark plug is another common issue that small engine owners face. Sometimes, you might also face choking of the fuel bowl too.

• Ignition and Compression Problems 

If you face issues with compression in the small engine, ensure checking the valves, pistons, cylinder and connecting rods. Ifthese are dirty and stripped, ignition issues might crop up. If the spark plug is dirty, or if the plug gap is incorrectly set or there is ashortening of kill switch, then ignition problems are likely to arise.

• Overheating

This is a grave concern for both the vehicle and the operator. Leaking gasket, lean fuel mixture, dirty engine, lack of oil or the absence of cooling fans can lead to overheating.

• Smoke Emission from the Engine

Blue or white smoke emission signifies that the oil is burning. Black smoke signifies aproblem with the carburettor. Often plugged and dirty air filters too tend to cause smoke emission.

• Knocking Engine

If your engine has a faulty spark head or has the flywheel loosely attached, it is a sign of knocking engine.  Excess carbon in the combustion chamber can cause knocking of the engine as well.

• Spark Plugs

The small engines tend to run poorly, when the spark plug buckles under load. This, in turn, is a result of faulty breaker points, weak valve spring or faulty setting of the carburettor.

Quick Tips on Small Engine Repair in Westborough

• Clean the Fuel Tank 

For an effective small engine,fuel should be stored in suitable containers. Add a fuel stabilizer to ensure there is a decreased rate of compound evaporation of gasoline. The stabilizer also prevents the fuel from absorbing air moisture. Change the oil after every 50 hours of use when the engine is still warm.  If your equipment has a push primer, create the right air-fuel mix for the engine. Clean the oil stains with degreaser and for clogging clean with a brush or gauge wire.

• Carburettor Cleansing

For small engine repair of carburettor, remove gas from it and turn off the fuel valve. After draining out excess fuel, clean it with carburettor cleaner or brake cleaner by spraying it into all the fuel lines. Scrub all parts with a wire brush and then spray choke cleaner, for clearing out debris, blow compressed air into all the holes.

• Countering Engine Overheating and Compression Problems

A dirty engine tends to cause overheating. To counter this, take off the mower case and clean out all the debris within. With compressed air, vacuum or toothbrush, get rid of all the debris. In case of low oil level, allow the engine to completely cool down and then add sufficient oil to bring up the oil level.

Fix the broken cooling fins and damaged shrouds to counter overheating issues related to small engine repair. Proper valve clearance and ensuring there is no leakage are pre-requisites for handling problems pertaining to compression repair.

• Curbing Smoke Emission and Problems of Knocking Engine

Smoke emission is a sign of burned fuel and an integral aspect of small engine repair. For this, proper valve clearance is necessary along with proper plugging in off fuel injectors. Engine deposits cause black smoke, which you can fix by adding detergent to the diesel fuel. Using a multifunctional treatment like Dee-zol reduces deposits and fuel burn. Cleaning of dirty cylinders and reducing the compression ratio can alleviate problems of knocking engine. Worn out spark plugs require new installation with the correct heat range regulated.

Small engines work well on tillers, chainsaws and edgers as well as outboard boats, snowmobiles and ultralight aircraft with equal efficiency. Proper maintenance of the various constituent parts is vital for smooth functioning of the small engine. Small engine repair DIY troubleshooting is suitable for small issues. However, for proper resolution, it is recommended to contact the experts.

Read More

Smart Tips to Make Your Lawn Mower Spring Ready

Spring is approaching and it is time to mow your lawn and keep it well-trimmed. To carry out the task effectively, you need an optimally functioning lawn mower. As the snow thaws and you see greenery all around, you know it is time to gear up your mower and keep it ready for the forthcoming spring and summer season. You can boost the efficiency of your lawn mower and cut down on costly lawn mower repairs by considering certain tips mentioned here.

    Careful Inspection of the Lawn Mower

First and foremost, you should carefully inspect all the parts of the lawn mower and replace any damaged or worn out parts. For the optimum and safe functioning of the mower, use replacement parts of the specific model as that of the lawnmower. It is not wise to use the parts that are available as universal fits. You should keep this in mind especially while replacing the lawn mower blades.

    Changing of the Lawn Mower Oil is Essential

Old gasoline left behind in the mower is one of the main reasons for the delayed starting of a mower. Thus to avoid this problem it is a good habit to drain the remaining oil from the mower after every cutting session. To do so, remove the drain plug located at the lawn mower engine’s bottom and drain out the dirty oil. Next, replace the drain plug and fill up the crankcase with oil according to the manufacturer’s instructions given in the manual.

    Installing a New Fuel Filter

By keeping the fuel filters clean, you can keep your mower running effectively and cut down on expensive lawn mowers repairs. Sometimes due to the damage of the fuel filters, effective cleaning is not possible.

    Treating Fuel is Absolutely Necessary

If you face trouble starting the lawn mower it could be due to stale fuel in the gas tank of your mower. Over a period of time, the untreated gasoline deteriorates and no longer functions properly. Hence to keep your lawn mower working properly and to avoid lawn mower repair in Hopkinton pour the required amount of the fuel stabilizer into the mix can of gasoline. This maintenance tip prevents the fuel from deteriorating. Draining the fuel does the job partly but a certain amount of it still remains in the carburetor bowl. This stale fuel causes the problem of starting the engine promptly.

Other Measures to Ensure the Effective Functioning of the Lawn Mower

    Change the Air Filter

To avoid draining your finances on costly lawn mower repairs in Hopkinton make sure to keep the air filter of your mower clean. Many lawn mowers are available with paper air-filters. Such air filters need to be replaced as cleaning them becomes impossible. You can clean the foam filters by scrubbing gently with a small portion if detergent and lukewarm water. Make sure to completely dry out the air filter before reinstalling. You need to get into the habit of replacing the air filter of your mower every season or within 25 hours of using it.

    Change Spark Plug of Lawn Mower

Minimize lawn mower repair by replacing the spark plug of the mower every season. This would ensure a smooth start of your mower. You can do this by unhooking the spark plug wire of mower followed by removing the mower’s old plug with the spark plug wrench. Install the mower’s new plug making sure it is not too tight or it could cause problem starting it instantly. Adjust the space at the end of the ‘spark plug’ according to the specifications of the manufacturer of the machine. The maintenance kits provided by the manufacturers include the pre-gapped plugs of a mower for a particular mower.

    Sharpen Lawn Mower Blades

To ensure a mower cuts grass effectively, it is essential to sharpen its blades. A blunt blade of the mower tears and rips the grass instead of cutting it. You can either take professional help or sharpen the blade by yourself with a metal file or a vice. You should carry out this task only, if you have enough experience to do it.

    Repair of the Mower as Required

If you face difficulty in starting the engine of your mower, it could mean major issues that require immediate attention. Thus, you are recommended to take professional help for regular servicing of your mower annually to reduce a lawn mower repair that can blow your budget.

Thus servicing your small engine by professionals is the best solution to keep the machine working optimally without glitches. Only with routine care and maintenance of your mower, you can reduce downtime and expensive lawn mower repairs.

Reference URL:
http://metrowestlawn.tumblr.com/post/168463697627/smart-tips-to-make-your-lawn-mower-spring-ready

Read More

Easy Troubleshooting Tips for Small Engine Problems

Small engine-driven vehicles like lawnmowers, snowmobiles, golf carts, and motorcycles amongst others have been helping humans in performing various daily-life activities, since the advent of technology in our lives. It is often wrongly assumed that the development of problems in these machines spells the end of their working lives, and calls for the replacement of their engines. However, undertaking small engine repair through the use of commercially available repair and replacement kits, and the recruitment of specialized technicians for small engine repair in Northborough is a relatively easy task.

For more information, please visit http://metrowestlawn.tumblr.com/post/168254614072/easy-troubleshooting-tips-for-small-engine

Read More